New Carb Approved! Znen Phoenix 150cc 16" 
Bigger Tires Gas Motor Scooters CA Legal! Cutting Edge Style!

Volume Discount:

Available Color:

Black

Black With Silver

Product Description

This fashionable vehicle comes with the latest in body design for cutting edge style, and it is built for a person looking for a transportation option that can keep pace with other motorized traffic, whether in the sprawled expanse of the suburbs or the concrete jungle of the city.

Powering this mid-sized scoot is a fuel sipping 150cc single-cylinder 4-stroke engine. It’s mated to an automatic transmission, which makes traveling to your destination literally as easy as twisting your wrist.

On level road, the Znen Phoenix 150 will accelerate to right around 50 mph rather fast without a hint of vibration.

Average sized riders will appreciate how much room there is while seated and even my 6-foot tall frame wasn’t cramped at the controls of the Znen Phoenix 150. Also the distance between the rider and the handlebars is short, which translates into a very relaxed riding position with your elbows resting to the side naturally.

On the Road: What a Difference 16 Inches Make

When it comes to road manners, the ZNEN Phoenix 150 16” wheels significantly aid handling and stability, two dynamics usually lacking in scooters. The wheel size makes this scooter slightly less Hyper-responsive at slower speeds, but the welcome tradeoff for that low speed maneuverability is higher speed stability and improved bump absorption.

Braking is provided by an ABS Hydraulic front and rear discs mounted near the large 16 inch front and rear wheels.

How about that storage space? The under-seat storage alone swallowed up a helmet, a laptop, and any other small personal belongings, with a little room to spare!

You are probably wondering how we can afford to sell these scooters at such low prices. We don’t hand pick products from different factories; we design, we select the best quality parts, and we build our own scooters!  Factory direct!  We ship directly from our 96,000 sq. ft. warehouse here in Chino California. We are here 7 days a week to assist you with your every need.

Product Highlights:

• High performance drive belt & Japanese designed carburetor
• Cutting edge body style
• Aluminum Rims
• 16” wheels front & rear
• Front & Rear Hydraulic disc brake
• Dual Rear Shock
• EPA approved and street legal in all 50 states.
  

Remember every purchase from Scooter Depot includes:

• Free Residential Service fee with lift gate service.
• Your unit started and tested by our mechanics before it is sent to you!
• Free MSO and Bill of Sale 
• Life Time technical support
• 1 year Engine warranty
• Full parts availability
• Factory Direct Pricing
• 100% Freight protection insurance

STREET LEGAL:

US EPA (Environmental Protection Agency) APPROVED

Unique & Genuine Factory VIN Number (Conforms with US Federal Motor Vehicle Safety Standard FMVSS)

US DOT (Department of Transportation) APPROVED

This Motorcycle/Scooter is registrable with department of motor vehicles and legal to own and operate in the public road in all states. Title, stickers, and other registration documents will be included with your purchase.

Technical Support: 

We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Free Registration documentation:  

We provide a complete MSO (Manufacturer's Certificate of Origin) and the Bill of Sale which might be required for registration at your local Dept. of Motor Vehicles. The MSO is such an important document and is not supposed to be shipped with the scooter, it will be mailed to you after you receive your scooter and email us the VIN number on the scooter. MSO generally requires 2 ~ 4 days to process.

Some Assembly Required.

In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! 

You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, valve adjustment etc.). In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Specifications

Engine Type	150cc, 4-Stroke
Cooling System	Air-Cooled
Max Horsepower	9.6HP/7500 rpm
Transmission/Clutch	CVT Automatic
Number of Gears	No
Final Drive	Belt
Starting System	Electric / Kick Start
Ignition	CDI
Max Speed	60+ MPH (Depending on Riders Weight and Road Conditions)
Max Torque	8.3 nm/6000 rpm
Battery	12V/7Ah
Fuel Capacity	1.6 Gallons
Frame	Reinforced Steel Tube
Front Suspension	Dual Telescopic Forks
Rear Suspension	Dual Shock
Front Brake	Hydraulic ABS Disc Brake
Rear Brake	Hydraulic Disc Brake
Front Tire	100/80-16-4PR with Aluminum Rim
Rear Tire	120/80-16-4PR with Aluminum Rim
Age Recommendation	Adult
Speed Governor	No
Lighting	Headlights, Turn Signals, Tail Lights, Brake Lights
Weight Capacity	360 lbs
Number of Riders	2
Dry Weight	282 lbs
Seat Height	31 inches
Overall Length	85 inches
Warranty	Engine 1 year, frame 1 year
Carton Size	78" X 22.5" X 46.5"
Assembly	This Item comes 95% assembled (battery set up, Trunk, mirrors and minor adjustments may be required). Be sure to tighten all screws and check for appropriate levels of engine fluid prior to operation. Warranty is valid straight from the box.

Note: Scooter performance may vary depending upon weather conditions, terrain conditions, length of use and wieght of rider.