Untitled 2
Only 3 Left! FIrst Come, First Served!
The Cutest & Most Competent 50cc Retro
Scooter-Alloy Rims! Free Trunk!
Volume Discount:
| QTY |
Price/Unit |
You Save |
| 2 |
$669.00 |
$660.00 |
| 3 |
$659.00 |
$1,020.00 |
| 4 |
$649.00 |
$1,400.00 |
| 5+ |
|
Product Description
The legendary classic 50cc scooter! Go Retro!
Voted most popular 50cc scooters in the past three years!
This classic 50 is what happens when you combine classic
Italian styling with modern engineering-an elegantly simple solution to the
age-old problem of getting where you need to be with maximum efficiency and
style. Powered by a clean, rock solid GY6 49cc s stroke engine that starts
with the push of a button and gets awesome gas mileage (up to 120mpg).
Undeniably, it is one of the most eye catching
scooters on the road today!
This classic 50 is straight up fun to ride
and it is slightly smaller and lighter than some 50cc scooters. Its light
weight means you can aggressively throw it into turns and generally carve up
city traffic
The Basics:
They are so popular because they are not only fuel
efficient (up to 120 mpg) but also you can drive without a special license
in most areas. They are simpler to get on and off and easy to handle. Simple
twist 'n go acceleration method leaves out the hassle of shifting gears.
You are probably wondering
how we can afford to sell these scooters at such low prices. We don’t hand
pick products from different factories; we design, we select the best
quality parts, and we build our own scooters! Factory direct! We ship
directly from our 96,000 sq. ft. warehouse here in Chino California. We are
here 7 days a week to assist you with your every need.
Updated features!
- Classic retro style—straight out of the movies.
- Super-economical to operate, effortless to
park, highly convenient transportation.
- Spacious locking storage compartment is perfect
for backpacks and groceries.
- This Classic achieves fuel economy up to an
estimated 120 mpg, with a fuel tank that holds 1.6 gallons of gas.
- Fully automatic CVT transmission
provides easy, twist-the-throttle-and-go operation.
- High performance drive belt &
Japanese designed carburetor.
- Aluminum Rims.
- Hydraulic disc brake.
- Wide, thickly padded single seat is
comfortable and sleek.
- EPA approved and street legal in
all states except for NJ & PA.
Remember every purchase from Scooter Depot includes:
- Free Residential Service fee
with lift gate service.
- Your unit started and tested by
our mechanics before it is sent to you!
- Free MSO and Bill of Sale
- Life Time technical support
- 1 year Engine warranty
- Full parts availability
- Factory Direct Pricing
- 100% Freight protection insurance
Technical Support:
We are a DMV certified full line
dealership, our experienced technicians provide professional service that
you can count on, phone number to technical support is 888-839-7088 or
909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order
information when you call.
Some Assembly Required.
In most cases and depending on which model
purchased, it usually takes anywhere from 30 to 90 minutes to complete the
assembly process of your vehicle. Our vehicles are usually 80% assembled at
the factory and fully tested prior to shipping.To complete the assembly of
your vehicle, you will need to properly install and/or assemble the contents
included with your vehicle. Depending on the model purchased, these items
are usually located in the storage compartment underneath the seat. For your
safety, be sure to check and tighten all screws, nuts, and bolts prior to
using your vehicle for the very first time and periodically thereafter.
Depending on the length of time the scooter has been stored in the crate
after factory testing, the carburetor may need to be cleaned due to possible
sediment build-up. Detailed instructions on how to perform this procedure
can be obtained by contacting our technical support team. Local pick-ups and
optional assembly service is available upon request.
Remember!
You are responsible for performing the setup and
PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie.
installing rear view mirrors, setting up and connecting the battery,
checking tightness of all screws, nuts, bolts, changing oil, valve
adjustment etc.). In some instances, it may be necessary for your vehicle to
be setup and tuned by a local service center. Items such as loose hardware
and parts damaged from loose hardware and components are not covered under
warranty. It is advisable to use a thread locking agent such as Loctite on
all hardware to help prevent loss of hardware. Occasionally, on some units,
it may be necessary to perform other routine checks or adjustments, such as
adjusting the setting of the idle speed and fuel/air mixture screws on the
carburetor, cleaning of the carburetor, checking to ensure wires are
connected properly, adjusting chain slack and alignment (if applicable), in
order to achieve optimum performance from your vehicle. We will gladly
assist you with any additional technical questions you may have.
Prior to first use, it is mandatory to have the existing motor/engine oil
(known as “packing oil”) replaced. The packing oil should be replaced
with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor
oil. Be sure to regularly inspect engine fluid levels to ensure that your
vehicle operates safely according to manufacturer’s recommended
specifications.
Specifications
| Engine Type |
49.5cc, 4-Stroke |
| Cooling System |
Air-Cooled |
| Max Horsepower |
3.0 |
| Transmission/Clutch |
CVT Automatic |
| Final Drive |
Belt |
| Starting System |
Electric / Kick Start |
| Ignition |
CDI |
| Max Speed |
30 MPH (Depending on Riders Weight and Road Conditions) |
| Battery |
12V/7Ah |
| Fuel Capacity |
1.16 Gallons |
| Frame |
Steel Stamped |
| Front Suspension |
Dual Telescopic Forks |
| Rear Suspension |
Single Shock |
| Front Brake |
Disc Brake |
| Rear Brake |
Drum Brake |
| Front Tire |
3.50-10 |
| Rear Tire |
3.50-10 |
| Lighting |
Headlight, Turn Signals, Tail Light, Brake Light |
| Weight Capacity |
260 lbs |
| Number of Riders |
1 |
| Dry Weight |
220 lbs |
| Seat Height |
30 inches |
| Warranty |
Engine 1 year; frame 1 year |
| Style |
Classic |
| Assembly |
Front wheel, front brake, fender, handle bars, mirrors, windshield,
and trunk are some parts that are required to be assembled. Battery will
need to be charged. |
Note: Scooter performance may vary depending upon weather
conditions, terrain conditions, length of use and wieght of rider.
