Exclusively offered! 150cc Gas Moped Scooter- Fun & Fast! Free Trunk!
Is there anything more fun than zipping around town on an
ultra-maneuverable scooter? How about hitting the trails with that same
The greatest addition to our existing 150cc scooters line!
This little scooter is built strong and tough!
This bare-bones scooter thinks it owns the place.
This 150cc scooter is a lightweight and itstruts onto the urban
scene showing off a thrifty 149cc engine that takes you where you want to go
on a sip or two of gas.This scooter is not only for those looking to save a
few bucks on gas, it’s for anyone looking to liven up their commute and the
weekend errands around town. The automatic CVT transmission makes it easy to
use for anyone new to scootering. The 4–stroke engine is much quieter than
we anticipated and with a push-button starter, it’s easy to get rolling. The
Baja style fat 10” tires extend the boundaries of where you can go and
provide a better ride on rough city streets. This “Best Of” motor scooter
will make a great addition to any garage.
You are probably wondering how we can afford to sell these scooters
at such low prices. We don’t hand pick products from different factories; we
design, we select the best quality parts, and we build our own
scooters! Factory direct! We ship directly from our 96,000 sq. ft.
warehouse here in Chino California. We are here 7 days a week to assist you
with your every need.
Remember every purchase from Scooter Depot includes:
- Matching rear locking storage trunk (normally a $45 upgrade,
- High performance drive belt & Japanese designed carburetor
- Aluminum Rims with 3.5 x 10” tires
- EPA approved and street legal in all states except for CA &
- Free Residential Service fee with lift gate service.
- Your unit started and tested by our mechanics before it
is sent to you!
- Free MSO and Bill of Sale
- Life Time technical support
- 1 year Engine and Frame warranty
- Full parts availability
- Factory Direct Pricing
- 100% Freight protection insurance
US EPA (Environmental Protection Agency) APPROVED
Unique & Genuine Factory VIN Number (Conforms with US Federal
Motor Vehicle Safety Standard FMVSS)
US DOT (Department of Transportation) APPROVED
This Motorcycle/Scooter is registrable with department of motor
vehicles and legal to own and operate in the public road in all states
except for CA and NJ. Title, stickers, and other registration documents will
be included with your purchase.
We are a DMV certified full line dealership, our
experienced technicians provide professional service that you can count on,
phone number to technical support is 909-287-0366 Monday thru Friday, 9am to
5pm PST. Please provide order information when you call.
Free Registration documentation:
We provide a complete MSO
(Manufacturer's Certificate of Origin) and the Bill of Sale which might be
required for registration at your local Dept. of Motor Vehicles. The MSO is
such an important document and is not supposed to be shipped with the
scooter, it will be mailed to you after you receive your scooter and email
us the VIN number on the scooter. MSO generally requires 2 ~ 4 days to
Some Assembly Required.
In most cases and depending
on which model purchased, it usually takes anywhere from 30 to 90 minutes to
complete the assembly process of your vehicle. Our vehicles are usually 80%
assembled at the factory and fully tested prior to shipping.To complete the
assembly of your vehicle, you will need to properly install and/or assemble the
contents included with your vehicle. Depending on the model purchased, these
items are usually located in the storage compartment underneath the seat. For
your safety, be sure to check and tighten all screws, nuts, and bolts prior to
using your vehicle for the very first time and periodically thereafter.
Depending on the length of time the scooter has been stored in the crate after
factory testing, the carburetor may need to be cleaned due to possible sediment
build-up. Detailed instructions on how to perform this procedure can be obtained
by contacting our technical support team. Local pick-ups and optional assembly
service is available upon request.
You are responsible for
performing the setup and PDI (Pre-Delivery Inspection) that a dealer would
normally perform (ie. installing rear view mirrors, setting up and connecting
the battery, checking tightness of all screws, nuts, bolts, changing oil,
etc.). In some instances, it may be necessary for your vehicle to be setup and
tuned by a local service center. Items such as loose hardware and parts damaged
from loose hardware and components are not covered under warranty. It is
advisable to use a thread locking agent such as Loctite on all hardware to help
prevent loss of hardware. Occasionally, on some units, it may be necessary to
perform other routine checks or adjustments, such as adjusting the setting of
the idle speed and fuel/air mixture screws on the carburetor, cleaning of the
carburetor, checking to ensure wires are connected properly, adjusting chain
slack and alignment (if applicable), in order to achieve optimum performance
from your vehicle. We will gladly assist you with any additional technical
questions you may have.
Prior to first use, it is mandatory to have the existing motor/engine oil
(known as “packing oil”) replaced. The packing oil should be replaced
with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil.
Be sure to regularly inspect engine fluid levels to ensure that your vehicle
operates safely according to manufacturer’s recommended specifications.
||Electric / Kick Start
||55 (+/- 5 MPH Depending on Riders Weight and Road Conditions)
||Reinforced Steel Tube
||Dual Telescopic Forks
||Headlights, Turn Signals, Tail Lights, Brake Light
|Number of Riders
||Engine 1 year; frame 1 year
||Classic, Standard Sports
||Front wheel, handle bars, mirrors and trunk are some parts that
require assembly. Battery will need to be charged.
Note: Scooter performance may vary depending upon
weather conditions, terrain conditions, length of use and wieght of rider.